TierraCast 4mm Compression Micro Rivets


PF678 Bright Rhodium Silver
Buy Bright Rhodium Silver »

PF683 Antique Pewter
Buy Antique Pewter »

PF681 Black Oxide
Buy Black Oxide »


PF679 Bright Gold
Buy Bright Gold »

PF680 Antique Brass
Buy Antique Brass »

PF682 Antique Copper
Buy Antique Copper »

4mm Micro Compression Rivets

Use to attach large hole links or spacers to material, to attach material to itself (folded over as with slide or hook clasp), or as decorative element. Use leather hole punching tool to form hole in material slightly larger than the rivet (2.45mm). Overall thickness of materials being riveted should be between approximately 2 mm and 4mm if soft (ex. leather to leather), and approximately 2mm to 3.1mm if a metal component is included in the materials.

These work best with flat leather and thick/heavy ribbon. You'll need a leather hole punching tool to make the holes, and a rivet setter and anvil (and mallet) to set the rivets - available on our tools for leather page.

  • Bag of 10 - $3.55
  • Bag of 50 - $13.90

American made by TierraCast® with culinary grade lead-free pewter.
The Antique Gold and Bright Gold finishes are approximately 20% higher than the prices shown.

TierraCast 4mm Rivet Setter

This rivet setter has been custom made for TierraCast to work with their 4mm compression rivets. It has a slightly cupped, domed end, exactly the right size to fit the 4mm rivets. The tapered tip allows you to reach rivets in tight places, such as rivets in the three-dimensional rivetable flowers shown above. The smooth, polished surface of the cup reduces the risk of marring or scratching the cap surface. The hexagonal shape keeps these tools from rolling around on your work area. Made in China.

A dot anvil is not included with this tool. You will need a dot anvil or bench block, plus a mallet or hammer to use the rivet setter. You can find these on our metal working tools page.

PT1 4mm Rivet Setter $5.95 Buy 4mm Rivet Setter »